Tutorials

Watch our tutorials and videos:

How to setup the software, how to insert your menu, inventory etc

We have over 20 videos please click the link below:

Unboxing - Review - how to setup the barcode scanner, thermal printer or cash drawer watch all of our videos here:

To setup the Cash Drawer:

1. Plug the RJ12 connector cable (the one that looks similar to a phone line) from the cash drawer into the receipt printer.

2. Next, head to your 'devices and printers' window on your computer.

3. Right click on your receipt printer, select printer properties -> device settings.

4. Once in here change the Peripheral Unit Type to 'Cash Drawer' and set the Unit 1 and 2 options to 'Document Bottom'.

printer setup

Tip: If you want your cash drawer to fire before the receipt prints you can set the Unit 1 and 2 options to 'Document Top'.

5. Save these settings and test it out by performing a test sale.

Setting Business PreferencesClick to hide

The first thing you need to do is to set up your business preferences on this software and tailor it to your needs. Please watch the video tutorials: “Main Setup”, “Hardware Setup”, and “Setup”. These videos can be found on our Website by clicking on the Support Tab and then clicking on the “FREE Support” Tab.

Setting up Quick Menu ButtonsClick to hide

If you want to find out more, please watch the video tutorials: “Quick Buttons 1″ and “Quick Buttons 2″. These videos can be found on our Website by clicking on the Support Tab and then clicking on the “FREE Support” Tab.

How to Change the Administrator PasswordClick to hide

For more information on how to change the POS software administration password please watch the video tutorial: “Administrator Password”. These videos can be found on our Website by clicking on the Support Tab and then clicking on the “FREE Support” Tab.

Filling Employee TableClick to hide

Please watch the video tutorial: “Employee Table”. These videos can be found on our Website by clicking on the Support Tab and then clicking on the “FREE Support” Tab.

Restaurant Maid - Floor DesignClick to hide

Please watch the video tutorial: “Floor Design”. These videos can be found on our Website by clicking on the Support Tab and then clicking on the “FREE Support” Tab.

INSTALLATION

Cash Drawer Cable

The cash drawer is fitted with a standard 6-pin RJ12 plug for direct connection to printer or any POS equipment conforming to the Epson standard. When the printer finishes printing a receipt, it opens the cash drawer automatically.

Cash drawer—Epson compatible POS Printer

Interface from drawer

Port in Receipt Printer

Manual Open

HOW TO OPEN THE DRAWER

Lock Positions

The key lock is a 3 function lock: Manual open, which means

turning the key to this position will open the drawer. The

Electrically Online

on-line position which means the drawer is controlled

by the printer. Locked open / closed means the drawer

Locked

Open/Closed

can’t be opened / closed without a key.

(See figure right)

Warning: To reduce the risk of damaging or breaking the key, avoid leaving it in the lock during normal operation

DRAWER REMOVAL

Open the cash drawer and remove the plastic coin tray by lifting it up. Then remove the bill tray. To do this, use a flat-head screwdriver to pry the plastic insert at the top front corners.(May require some force) Dislodge the plastic insert at the top two front corners, and lift to remove. Pull the drawer out until it stops, tip the front edge of the drawer up and pull the drawer out at an inclined angle.

The coin slots can be adjusted by lifting the dividers, and placing them in a new slot.

To adjust the bill slots, first, remove the plastic coin and bill tray (see # 3). Lift up all 5 bill clips. Then, unscrew the metal plate that goes across all bill slots. Adjust the plastic bill dividers as necessary. You will also need to adjust the bill clips by unscrewing them, and re-screwing them in the appropriate place.

ADJUSTING THE BILL SLOTS AND COIN SLOTS

5. MAINTENANCE

The cash drawer slides should be periodically cleaned and lubricated. Frequency is dependent on use and the environment, but typical recommended frequency is every three months. Using a dry, lint free cloth, wipe out the old grease and debris

from the inner and outer slides. Do not use water or any type of liquid cleaner. Using a clean applicator, apply a thin layer of lithium-based bearing grease to the inner and outer slides. Cycle the slides several times to properly coat the Polyurethane rollers and to spread the grease evenly.